전력전자 제품
PRODUCT ITEMSTel : 문/의/전/화
070-4333-8982
Fax :
070-7966-8928
평일 09:00 ~ 19:00
일요일, 공휴일 휴무
입금계좌: 기업은행
323-109439-01-017
예금주 : (주)파워티엠
Programmable AC/DC Power Source / AFV-P series
AFV-P series
AFV-P Series is a programmable AC power source with DC output and precision measurement. This compact power source provides clean power with THD less than 0.3% at 50/60 Hz and it delivers output voltage of 0-310 V and frequency of 40-500Hz (opt. 15-1000 Hz).
Panel Description
· 1) Power Switch
· 2) Touch Screen HMI
· 3) Rotary Knob
· 4) Output / Reset
· 5) AC Output Socket
· 6) Output Terminals
· 7) Remote Sense
· 8) USB Interface
· 9) RS-232 / RS-485
· 10) Ethernet Interface
· 11) Input Voltage Selector
· 12) PLC Remote In/Out
· 13) Input Socket
· 14) USB Interface
· 15) Sync. Signal I/O
AC & DC Output
AFV-P 시리즈는 실제 그리드 조건을 시뮬레이션하기 위해 AC 출력을 제공할 뿐만 아니라 사용자 설정에 따라 DC 출력도 가능 합니다. R&D 및 인증 연구소를 위한 이상적인 비용과 효율적인 전력 테스트 솔루션입니다.
Intuitive Touch Screen Control
To create a complex sequence on the HMI is no longer a difficult task for AFV-P series. The 5 inches touch screen provides users a clear display and an easy set up. AFV-P is also equipped with a rotary knob for better fine tune adjustments.
Programmable Simulations: Transient Feature
Through the Transient feature, user can have more control over the waveform by inserting disturbance at user-defined locations with user-defined drop/rise range. This is a useful feature to simulate different precompliance tests and various types of power line disturbance, such as surge, sag, spike and dropout, for immunity tests.
Ideal for High Inrush Current EUT & Start / End Angle Setting
The AFV-P series can provide up to 4.5 times of peak current from its maximum rated current, which is ideal for inrush current test, such as electric motor test. Additionally, the AFV-P series allows user to set the start angle/end angle for the product output, which is suitable for testing switching power supplies.
Multiple Communication Interfaces & Control Software
The AFV-P series is equipped with communication interfaces of USB, Ethernet, RS232, and RS485, so users no longer need to spend extra on remote interface card. Only GPIB and analog are optional interfaces. AFV-P also provides control software with comprehensive programming features and LabView driver, which help users to easily control the AC source without further needs of programming.
Programmable Simulation: Step & Ramp Features
Ramp and Step feature allows users to define slew rate of voltage and frequency at each Step. Users can set the rise/fall time, time unit and voltage/frequency change between Steps to create a wide range of waveform. Additionally, Ramp feature can effectively reduce the inrush current by simulating soft start for motor or compressor startup.
Fast Response & High Stability
AFV-P series is a high performance AC source with fast response time, low total harmonic distortion and tight voltage regulation. With its technically advanced features, users can easily simulate power line disturbance, such as sags, surges, dropouts and spikes.
AFV-P 시리즈는 DC 출력 및 정밀 측정을 지원하는 프로그래밍 가능한 AC 전원입니다.
이 소형 전원은 50/60Hz에서 THD가 0.3% 미만인 깨끗한 전력을 제공하며 0-310V의 출력 전압과 40-500Hz(옵션 15-1000Hz)의 주파수를 제공합니다.
설계 검증, 품질 보증, ATE에서 생산 라인에 이르기까지 상업, 방위 및 항공 우주 테스트 애플리케이션에 적합합니다.
Single Phase: 600VA / 1250VA / 2.5kVA / 5kVA
≦ 0.3% at 40~100Hz, ≦ 0.5% at 101~500Hz, ≦ 0.8% at 501~1000Hz (Resistive Load)
≦ 0.07% F.S. (Resistive Load)
≧ 3
≧ 4.5 times of max.output current (rms)
≦ 300 μs
0~210V / 0~420V
47~63Hz
*** 본 (주)파워티엠 홈페이지의 게시물 및 제품 자료를 사전 동의없이 무단으로 복사 및 배포를 금지합니다. ***
|